Cuplock Scaffolding

Cup lock Standards have cup joints welded at every 500mm or 1000mm intervals, thus offering levels for working & also for bracing the standards while using in the slab support when loaded.

Code No.	Length
1079 1080 1081 1082 1083	3.0 M 2.5 M 2.0 M 1.5 M 1.0 M

Ledgers have forged blade ends which fit in the cup joint on the standard. They can be used in variety of Ledger size combinations to suit required bay size.

Code No.	" L" Length (mm) centre to centre of standards
1089 1090 1091 1092 1093 1094 1095 1096 1097	2.5 M 2.4 M 2.0 M 1.8 M 1.5 M 1.25 M 1.0 M 0.9 M 0.6 M

Codes	Length
1098 1099	1250 mm 1250 mm

Cantilever Frames support the formwork beyond the external periphery of the slab. The frames have blade ends for locating in the cup joint & accept adjustable jacks in three positions of 1.2m,.

Intermediate transom provides a safe mid-bay support for 38mm scaffold boards. They hold the ledgers in their jaw sections and prevent the central bending of the platform boards.

Code no.	Length
2000 2001 2002 2003	1. 5 m 1. 25 m 1. 0 m 0. 9 m

Beam support bracket are used to support the drop beams encountered within the regular slab support grid. This eliminates the need for the beam bottoms to be propped up from the ground. The beam brackets are capable of receiving adjustable jacks for reaching the beam bottom level.

This bracket recieve 1, 2 or 3 board of 9 inch width as per your requirement.

Scaffold board this is manufactured in various lengths upto 12 mtr. This has a width of 228 mm and 38 mm depth with antiskid surface on top. Can come with or without hooks to sit on the tubular or the angle transoms. Finish painted , pre-galvanised or hot dip galvanised. Can be also manufactured as per customer requirements.

Suspended scaffold assembles from the top down, not from the bottom up. Therefore your crew can work over water, traffic, utility lines, railways, shipyards and production lines with greater ease, safety and money savings. Access the complete fascia or underside of bridges to inspect, paint, or sandblast. Inspect or repair piers, tanks, oil rigs, ships etc.

Cuplock is a fully galvanized multi-purpose steel scaffold system for general access and supporting vertical loads. The unique circular node point allows up to 4 components to be connected in one fastening action. Cuplock staircase towers and mobile towers are also available.

Cuplock is ideal for a wide range of applications including continuous façade, circular scaffold, birdcage access and staircase access.

Advantages:
1) Faster to erect than traditional methods - up to 4 components secured in one go Unique node point
2) High grade tube up to 20% lighter than standard 4mm scaffold tube
3) Highly damage resistant
4) Accepts scaffold boards, battens or decking platforms.